New pages
From Ubicom Developer
(Latest | Earliest) View (newer 50) (older 50) (20 | 50 | 100 | 250 | 500)- 16:49, 24 February 2011 Customize uClinux (hist) [33,313 bytes] Jbass (Talk | contribs) (Created page with ' asdf')
- 16:48, 24 February 2011 Customizing BSPs (hist) [267 bytes] Jbass (Talk | contribs) (Created page with 'Select one of the Ubicom distributions below for instructions on how to customize the BSP for your device. *Customizing a Ubicom uClinux Distribution *Customizing a Ubicom Ope...')
- 17:43, 8 February 2011 BSP RDKs/Building AndroidTAP (hist) [9,876 bytes] Jbass (Talk | contribs) (Created page with ' asdf')
- 23:01, 8 December 2010 BSP RDKs/Building DLNAS (hist) [11,129 bytes] Jbass (Talk | contribs) (Created page with ' place holder')
- 21:46, 19 May 2010 NOR NAND Bootstrapping (hist) [1,024 bytes] Jbass (Talk | contribs) (Created page with '== UNDER CONSTRUCTION<br> == <br> ~/ubicom-distro/u-boot/include/configs<br> <br> Value =<br> 'mtdparts=ubicom32_boot_flash:512k(launcher)ro,14080k(upgrade),15' +<br> '36k(jf...')
- 23:03, 14 May 2010 BSP RDKs/Building IAP (hist) [9,091 bytes] Jbass (Talk | contribs) (Created page with '== Introduction == The purpose of this page is to walk users through the process of building the Internet Audio Player reference design on the Ubicom IP7K IAP board. == Hardw...')
- 22:41, 14 May 2010 BSP RDKs (hist) [458 bytes] Jbass (Talk | contribs) (Created page with '== Introduction == The purpose of this page is to walk users through building each of the Ubicom Reference Designs with their respective Board Support Packages. *Building for...')
- 20:19, 12 May 2010 LIRC (hist) [9,908 bytes] Rwessels (Talk | contribs) (created)
- 16:22, 3 May 2010 Adding a new DAC (hist) [11,046 bytes] Jbass (Talk | contribs) (Created page with '== Introduction<br> == The purpose of this page is to describe the process of adding a new DAC to the Ubicom Linux Distribution. This document walks through several pieces...')
- 17:45, 26 April 2010 Adding Human Input Devices (hist) [7,982 bytes] Jbass (Talk | contribs) (Created page with '= Introduction = The purpose of this page is to describe the process of adding a Human Input Device (HID) to the Ubicom platform. This application note will walk through t...')
- 23:06, 18 March 2010 Serial (hist) [7,158 bytes] Rwessels (Talk | contribs) (initial version)
- 18:16, 11 March 2010 How to Create a New Page (hist) [78 bytes] Lstafford (Talk | contribs) (Created page with '*Type the name as a link in the address bar. *Type enter. *Click Edit. <br>')
- 00:55, 3 March 2010 SDK 1.0 Profiler (hist) [3,243 bytes] Otto (Talk | contribs) (Created page with ' Do the following for enabling profiler in the firmware. #Edit the script gen_config.sh in Ubicom/sdk/projects/ultra #Add the following line <pre> -c IPPROFILE 1 -c IPPROFILE_...')
- 00:11, 3 March 2010 OpenWrt (hist) [197 bytes] Otto (Talk | contribs) (Created page with 'OpenWrt - How tos or Frequently asked questions.')
- 16:11, 18 February 2010 Porting Guide (hist) [53 bytes] Rwessels (Talk | contribs) (initial version)
- 21:01, 25 January 2010 Reference Boards/ip7500iap (hist) [2,411 bytes] Jbass (Talk | contribs) (Created page with 'The Ubicom Internet Audio Player Reference Design provides a reference hardware and software solution enabling the quickest time to market for internet radio and networked audio ...')
- 21:51, 18 January 2010 Reference Boards (hist) [534 bytes] Jbass (Talk | contribs) (Created page with '= Ubicom Reference boards = Ubicom provides a set of reference boards that provide either a development platform for product design or an application specific platform for targe...')
- 20:06, 28 October 2009 OpenWrt Port a Feed (hist) [2,178 bytes] Rwessels (Talk | contribs) (initial page.)
- 00:30, 22 October 2009 Add a new application to openWRT (hist) [4,652 bytes] Otto (Talk | contribs) (Created page with 'This application note describes the steps required to add a simple application to openWRT.')
- 21:33, 24 September 2009 Ubicom Dongle (hist) [9,130 bytes] Otto (Talk | contribs) (Created page with ' 1.0 Introduction 2<br>2.0. How to use Ubicom Programming Dongle 3<br>2.1. Connecting the Ubicom Dongle to the Target 3<br>2.2 IP address of Dongle 4<br>2.2.1 Determining cu...')
